Wharfedale Titan12"

 Proprietary 90 x 60 Elliptical Wave Guide Horn design
  • Custom Heavy duty moisture-proof 12" LF driver
  • High-end Titanium HF Compression Driver
  • Tough Polypropylene molded cabinet with rubber padded handles
  • Multiple M8 rigging points and integral tripod stand adapter
  • Rugged protective grille and top-stacking receptacles
  • Trapezoid shape for arrays as well as stage monitor applications
  • DTF™ - High-Frequency Driver Overload protection
  • Sophisticated Linkwitz-Riley 24dB/octave crossover design
  • High-Frequency EQ switch (boost/flat) for long-throw applications
  • Both 1/4" and NL4 connectors provided
  • Available in grey & white
  •   http://www.wharfedalepro.com/Portals/0/PDF_Data/TITAN_12_Brochure.pdf

     

    Titan™ 12

    Wharfedale Pro Titan™ 12 series with 12"/2" voice coil LF components and 44mm Titanium Diaphragm true Compression Driver and the integrated 90°x60° Waveguide horn to achieve a clean volume dispersion with wide, even reflection of the high frequency. The cabinets of the Titan™ series are made of extremely resonance proof High Density Polyethylene structural foam finished. This material gives a lightweight and very robust enclosure.

    The system can be arrayed for additional coverage and SPL requirements. The elliptical waveguide HF section provides consistent coverage over its specified range for low feedback in open mic applications and improved array smoothness, whether applied to a reverberant or "dry" club type acoustic environment The Titan™ 12 integrates successfully with the room for superior sound quality with a minimum of equalization and tuning.

    For permanent sound installations, architectural compatibility of primary importance, mounting points become critical. Titan™ 12 series threaded points (Three on top, four on bottom, and three on each side for horizontal rigging) set a standard with Omnimount footprint on bottom.

    Titan™ 12

    Wharfedale Pro Titan™ 12 series with 12"/2" voice coil LF components and 44mm Titanium Diaphragm true Compression Driver and the integrated 90°x60° Waveguide horn to achieve a clean volume dispersion with wide, even reflection of the high frequency. The cabinets of the Titan™ series are made of extremely resonance proof High Density Polyethylene structural foam finished. This material gives a lightweight and very robust enclosure.

    The system can be arrayed for additional coverage and SPL requirements. The elliptical waveguide HF section provides consistent coverage over its specified range for low feedback in open mic applications and improved array smoothness, whether applied to a reverberant or "dry" club type acoustic environment The Titan™ 12 integrates successfully with the room for superior sound quality with a minimum of equalization and tuning.

    For permanent sound installations, architectural compatibility of primary importance, mounting points become critical. Titan™ 12 series threaded points (Three on top, four on bottom, and three on each side for horizontal rigging) set a standard with Omnimount footprint on bottom.

    SPECIFICATIONS
    MODEL TITAN 12 PASSIVE
    GENERAL INFO
    System type 12" 2-way passive
    Frequency response +/- 3db 55-20kHz
    Sensitivity (db 1w@1m) 98dB
    System impedance 8 ohms
    Maximum SPL Peak dB 128dB
    POWER HANDLING (Watts)
    Continuous RMS 250
    Program 500
    Peak 1000
    LF DRIVER
    Lf driver size mm / inches 1x12"
    Lf voice coil size 64.26mm/2.5"
    HF SECTION
    Hf voice coil size 44mm/1.75"
    Hf type Compression Driver
    Hf diaphragm material Titanium
    Horn dispersion (H x V) 90 x 60
    Hf exit size mm / inches 25mm/1"
    Hf horn shape EWG™ - Elliptical Waveguide
    Hf peak indicator Peak LED ring in horn throat
    CROSSOVER SECTION Type: 2-way
    Crossover Frequency / Filter 2.4 kHz / Linkwitz-Riley
    Hf driver protection DTF™ - 175 Dynamic Thermal Filament
    Hf EQ (Boost / Flat) 3dB boost (long-throw) / Flat (near-field)
    PHYSICAL FEATURES
    Finish Black or White
    Handle quantity 2 carry handles (one on each side)
    Suspension points (10) M8 points for safe flown applications, (4) M8 inserts on bottom in OmniMount® 60.0-type footprint
    Stand adapter - BOTTOM Speaker pole-mount receptacle with lock screw, Optional wall-mount bracket
    Stand adapter - TOP Optional dual-unit array speaker stand hardware
    Enclosure type Molded Polypropylene
    Enclosure shape Trapezoidal for vertical array and horizontal stage monitor applications
    IN / OUT PANEL (speaker Level)
    Input connector 2 x 1/4" jacks and2 x Speakon™
    DIMENSIONS & WEIGHT
    Height ( mm / ins ) 556mm/21.88"
    Width Front / Rear / mm / ins 384mm/15.1" / 180mm/7.1"
    Depth ( mm / ins ) 312mm/12.3"
    Net weight ( kg / lbs ) 12kg/26.4lbs
    Gross weight ( kg / lbs ) 14kg/30.8lbs
    !
     << Back