<< Back  
Larger picture

101ACT PA System

Part Number MA-101ACT ACD

The MA-101ACT PA System is designed specifically for teaching/lecturing use in classrooms, conference rooms, training rooms, and similar locations.  The system consists of:

  • MA-101ACT  27W, 100-channel, mains-powered lecturing amplifier
  • MT-101ACT  Multi-funcion, wireless, infra-red, remote-control microphone with built-in Ni-Mh batteries
  • MP-101ACT  Microphone stand and battery charger unit

Use the microphone remotely to switch the amplifier on and off and to adjust the volume level.  The microphone can be hung round the neck, using the supplied neckstrap, so the user has total freedom.

Accessories, such as a cassette player, CD or MP3 player, headband or lapel microphone can be plugged into the microphone unit for their signal to be received by the amplifier.

 

Also available is an extension (second) loudspeaker and a wall bracket for either the amplifier or the extension loudspeaker.  Headband (MU-53HNK) and lapel (MU-53LK) microphones are available from our standard MIPRO range of accessories.

Amplifier Power Output 30W rms / 4ohm load
AC Power Built-in 90~264Vac switching power supply
Speaker 5 inch full range, high efficiency
Connector 1 External Loudspeaker
Dimensions H157 x W190 x L275 mm
Weight 2.4kg
Mounting Wall/Ceiling via direct hanging or wall-mounting kit
Receiver Carrier Frequency Range Fixed 1 channel from 97 channels between 620~920MHz
Sensitivity 10dBuV at max.dev.
Signal/Noise ratio >70dB
THD <0.5% at 1KHz
Transmitter Power Built-in rechargeable batteries
Inputs Built-in condenser microphone.
External 3.5mm jack with switchable MIC/LINE level
Dimensions H40 x W32 x L182 mm
Weight 150g

!
 << Back